Step 1: Wash and thoroughly dry car. Use a high quality, non-spotting vehicle wash such as Turtle Wax® ICE® Car Wash. Vehicle finish should be cool to the touch. Do not apply in direct sunlight.

Step 2: Use gloves if hands are sensitive to car wax and/or black pigments.

Step 3: Apply Step 1, Black Pre-Wax Cleaner & Conditioner to applicator and apply to vehicle using a back and forth motion to deep clean finish. Let dry to a haze. Apply to one section of the vehicle at a time.

Step 4: Lightly mist Black Spray Detailer onto a folded micro-fiber cloth or onto surface and remove polish. Use the same applicator and micro fiber towel until entire vehicle has been prepared with Step 1.

Step 5: Using the other applicator, apply Step 2, Black Carnauba Blend Wax, to the vehicle finish using a back and forth motion. Let dry to a haze.

Step 6: Lightly mist Black Spray Detailer onto a fresh, folded micro fiber towel or onto waxed surface and lightly buff to a high gloss shine turning cloth frequently.

Step 7: Use a clean micro fiber towel and Black Spray Detailer for a final wipe of each section to enhance finish.

Step 8: Wash hands thoroughly after use.

Follow hand-applied instructions but substitute hand application with machine application using foam bonnets and use a polisher with 1500 RPMs max speed. Apply about ½ - 1 ounce to pad and spread. Work slowly with constant pressure. Mist Black Spray Detailer on foam pad to increase work time and reduce friction. Wipe buffed area with micro fiber towel. Polish one section at a time.

Use separate micro fiber bonnets or foam pads to apply each Step. Use orbital buffer to spread each application. As with hand application, let Step 1 and Step 2 dry to a haze, before removing with Black Spray Detailer and micro-fiber towel. Polish one section at a time.